Hjem / Cleaning Impregnation

Cleaning Impregnation

Suitable for:

Basic cleaning of WPC (Wood Plastic Composites) as well as resysta and polyrattan surfaces. The specially developed PNZ WPC CLEANER removes atmospheric pollution, algae, graying, grease, oil and other types of contamination. This environmentally friendly cleaning concentrate even removes dirt from ripples, cracks and grooves.

Application/Treatment:

  • Application temperature from +8°C.
  • Drying time after application is approximately 12-24 hours.
  • After drying, treat WPC again, e.g. with PNZ WPC IMPREGNATION.
  • Acts differently on differing surfaces. Test in inconspicuous area.

Depending on the degree of contamination, apply PNZ WPC CLEANER pure or diluted with water at max. 1:10 to the pre-wetted WPC surface and let soak for approximately 3-5 minutes. Then use scrubbing brush or cleaning pad to remove water. Do lot allow PNZ WPC CLEANER to dry, but rather work in sections. Remove loosened contamination and rinse with fresh water. Repeat process as needed. After WPC CLEANER application and sufficient drying time of approximately 12-24 hours, treat WPC again, for example with PNZ WPC IMPREGNATION in order to prevent graying or weathering and repeated contamination.

Use:

Approximately 15-80 ml per m2, i.e. 1 liter PNZ WPC CLEANER yields approximately 12-65 m2 surface per coat.

Storage:

Cool and frost-free. Lasts 3 years when unopened.

Ingredients:

Water, <5% anionic tensides, <5% non-ionic tensides, soy lecithin, <5% phosphates, butyldiglycol.

Important notice:

Keep PNZ WPC CLEANER away from food products and animal feed. When spraying, do not inhale mist. In case of skin or eye contact, rinse with fresh water. We recommend wearing rubber gloves during application. S2: Keep away from children. May cause allergic reactions. Recycle only empty containers. Dry material residues may be disposed of via household waste or construction waste. Dispose of liquid residues at collection point for waste paints. ASN no.: 070699. UBA 260100002, Giscode GG10.

Package sizes:

1 liter, 2.5 liters, 5 liters, 10 liters and larger.

Suitable for:

Impregnation of WPC (Wood Plastic Composites) as well as resysta and polyrattan surfaces. PNZ WPC IMPREGNATION is high penetrating, clear and suitable for all WPC surfaces. Made from natural oils, the product impregnates WPC surfaces open-pored and improves their weather- and UV-resistant as well as their resistance against dirt and household liquids.

Application/Treatment:

  • The surface must be frost-free, clean, free of dust and dry.
  • Pre-treatment with PNZ WPC CLEANER removes algae, grease, dirt and other types of contamination.
  • Application temperature (including drying) from +8°C.
  • Acts differently on differing surfaces. Trial coats are absolutely necessary.

Apply PNZ WPC IMPREGNATION L twice using a brush, roll or cloth or spray gun (intermediate drying approximately 12 hours). The product may be re-coated also when dry after approximately 8-12 hours. With wet and cold weather, the drying time may be longer. Maintenance application as needed.

Use:

Approximately 50 ml per m2, i.e. 1 liter PNZ WPC IMPREGNATION yields approximately 20 m2 depending on the surface structure. With rippled surfaces, the use may double or triple.

Cleaning:

Clean all tools using thinner

Storage:

Cool and frost-free. Lasts 5 years when unopened. Once container is opened, transfer contents to smaller container, close airtight and use up shortly after.

Ingredients:

Enhanced natural oils and waxes, dearomatised hydrocarbons, pigments, if pigmented, drying additives

Important notice:

When using several containers with different lot numbers, mix together in larger container. Stir contents before and during use. S2: Keep away from children. May cause allergic reactions. Recycle only empty containers. Dry material residues may be disposed of via household waste or construction waste. Dispose of liquid residues at collection point for waste paints. ASN no.: 120112.

Package sizes:

0.75 liters, 2.5 liters, 10 liters and 30 liters.

WPC Decking Forhandlere Sertifikater

WPC Decking Systems

Bulgaria Decking AS er et ungt selskap som fokuserer i utviklingen av lokale okonomi . Volumen av teknologiene er noksa stor og det kan produseres 20.000 kvm WPC decking eller WPC relaterte produkter hvert ar.

WPC produkter som tilbys av Bulgaria Decking AS har gatt gjennom ti forskjellige produkttester de siste arene. Vi er en miljobevisst selskap, og vi vil arbeide for a redusere avhengigheten av trevirke til produksjon av miljovennlige produkter.

Kontakter

Adresse: 1111 Sofia, Geo Milev, 33 Manastirska str., fl. 1, at. 5

Produksjon: Sofia region, Lokorsko village

Telefon: +359 899 19 77 19

Epost: kalin[at]buldecking.bg

Kartet Foresporsel

Foresporsel om et produkt

Navn*:

Epost*:

Telefon:

Kompani:

Adresse:

Forespørsel*:
Capcha code: